As an Amazon Associate I earn from qualifying purchases. Without Any Extra Cost to You!
Deciding to install a backyard pond in your home can be a wonderful idea. You can use it to keep fish, grow aquatic plants, or turn it into a relaxing water feature. However, many people might balk at the perceived complexity of installing a pond. Thankfully, it’s easy to build a backyard pond. Let’s look at how you can do it.
How To Build A Backyard Pond: 6 Steps
Step One: Choose A Place For The Pond
The first thing that you need to do is decide where you are going to put the pond. Where you put it can often depend on what you are planning on using the pond for. If you want to use it to grow flowers, you’ll need to try to choose a place that gets the sun. However, if you want to keep fish, you might want to avoid a place that gets the afternoon sun. This can heat the water too much, which can harm the fish.
The next thing that you’ll need to decide is how big you want the pond to be. This depends entirely on your personal preferences. If you want to keep fish, consider how big they are going to grow, so you will have enough space to accommodate them. You might also want to leave some space around the pond, rather than putting it against a fence. This can make it easier to tend to.
Lastly, consider any other obstacles that might affect the pond. For example, avoid building in a low lying area. These sites can often be prone to flooding. You might also want to avoid putting the pond near a tree. This can result in a lot of debris falling into the water, making it harder to keep clean.
Step Two: Dig The Hole
The next thing that you will need to do is dig the hole. How deep and wide you want to make it will depend on your personal preferences. If you have soft soil, you should be able to dig this hole by hand. However, if the ground is too hard, or you want a deep hole, you might need to call in a professional.
Step Three: Line The Hole
The next thing that you need to do is line the hole. This will ensure that the water doesn’t leak out. It’s best to make sure that you’re using a strong plastic line, like an EPDM plastic. This should be available from most hardware stores. Before applying the liner, add some builders sand. Often, you’ll need to cover the bottom with at least half an inch of sand. This will protect against rocks and sticks. If you want extra protection, you can use some old carpet underlay. When you’re applying the liner, make sure that there aren’t any holes or tears. These provide areas where the water can leak out.
When you’ve lined the pool, you might want to put a second layer of line around the outside. This will protect the pond when you stand on these areas to clean it.
Step Four: Add A Water Pump
Once you’ve finished adding the liner, you can start getting the pond ready for the fish or plants. This means that you’ll need to add a water pump. This will allow you to keep pumping oxygen around the pond, which is essential to keep the fish healthy.
The size of the pump will depend on a few key factors. First, you’ll need to take into account the size of the pond. The bigger the pond, the larger the pump you’ll require. You might also want to think about what you plan to use the pond for. The type of fish or plants that you want to keep can often impact on the amount of oxygen that you require. If you want more tips about choosing the right pump check out this informative analysis https://www.backyardstyle.com/best-pond-pump/.
You might also need to add a few other elements to the pond, depending on where you live. If you have cold winters, you might want to add a water heater. This will keep the fish warm during the colder months. You can also add a fountain. This will further aerate the pond while providing a more peaceful atmosphere.
Step Five: Add The Water
When you’ve installed the pump and the heater, you’ll be ready to start filling the pond up with water. You can do this using a garden hose. As you fill-up the pond, you’ll start to notice that the liner is getting pulled tight. This is natural. If you want to add fish, you might want to add some dechlorinate to the water, to make it a safe environment.
Once you’ve finished putting in the water, add a layer of rounded rocks around the outside of the pool. This will stop the pond from overflowing on a rainy day. It can often look better if you use several shapes and sizes. This will create something that appears more natural. Try multiple configurations until you get something that works for you.
Step Six: Add Fish Or Plants
Finally, your pond will be finished. It’s now ready for you to add the fish and the plants. These can make a great addition to your backyard, helping you feel more relaxed. If putting fish in the pond, leave them in their plastic for a few minutes, so they can adjust to the water temperature.
A backyard pond can be one of the best additions to your home. It will provide a great place to relax, as you watch fish swim through the water. As we’ve seen, this project doesn’t need to be expensive or difficult to complete. So, follow these steps to install a backyard pool in your home today.
In this article, we’ve discussed the ins and outs of creating your very own backyard pond without any hassle. Simply go through these steps, and get to work on your soon-to-be gorgeous garden feature. We can hear the relaxing sounds of lapping water already!